|
 The new BSE module for NX users is a complete tool for accurately estimating Blank Size and generating Blank Nests. BSE optimizes material utilization and outputs reports for quoting and estimating. The BSE module also includes a one-step FEA solver that gives you an early indication of formability through thickness change, forming limit diagram, major and minor strain and much more. BSE is built for cost estimating and evaluating process feasibility.
INSIDE THE NX ENVIRONMENT
Provides tool & die makers with an easy to use forming feasibility and cost estimating tool, without leaving the NX environment. No data translation is required.
 PART & SURFACE PREPARATION
Split the part top and bottom (inside & outside surfaces) to generate the middle surface automatically. There is an array of helpful functions that fix and fill surface holes and gaps.
AUTO TIPPING
Recommends the best forming position. Auto tip also shows undercut and depth of draw. Manual tip is also available.
 BLANK OUTLINE GENERATION
Industry proven blank outline generation from the formed part design.
NESTING
1-out, 2-out, mirrored and multiple blank nesting. Material utilization and scrap are calculated & output.
(FEA) FINITE ELEMENT ANALYSIS
This cutting-edge one-step solver calculates the forming conditions in minutes. Results include deformation, forming limit diagram, % thinning, % thickening, major and minor strain.
 PRESSURE PAD / BINDER / DRAWBEADS
Quickly include pressure pads, binder and drawbeadsin your feasibility study.
REPORT GENERATOR
Generates HTML Reports for Blank Nesting and costs.
Request A Quote
eta/DYNAFORM contact: Qing Jeanne He
Tel: +1 (248) 729-3010 Ext 234
Fax: +1 (248) 729-3020
Email:
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
|
